View previous topic :: View next topic |
Author |
Message |
John Garlic Legionary


Joined: 12 Apr 2006 Posts: 450 Location: Weslaco, TX
|
Posted: Wed Aug 18, 2004 10:32 pm Post subject: Bowstrings Question |
 |
|
Hi Guy,
Getting a little anal perhaps, but am inspired by some paint jobs I've seen
and wanting to up appearance of next troops I paint. I overheard a discussion
about stringing bows up several months back and am considering giving it a try
in 15mm. I also liked the chariot reins I saw at DBM tournament in LA in
June. Anyone out there do any of this? Do you do anything more than knot some
fine thread and perhaps dot it with superglue to fix knot?
Thanks,
John Garlic
[Non-text portions of this message have been removed]
|
|
Back to top |
|
 |
John Garlic Legionary


Joined: 12 Apr 2006 Posts: 450 Location: Weslaco, TX
|
Posted: Thu Aug 19, 2004 12:09 am Post subject: Re: Bowstrings Question |
 |
|
Greek,
You do the string after paint job I assume?
John
> I am a bowstringer in 15mm. String will not work. It's too flimsy. Strip
> some speaker wire and use the filaments, supergluing after you wrap each
> end around each end of the bow. Some figures are amenable to drilling the
> pullback hand behind the arrow feather to v-shape the string of a figure
> in the act of shooting. You just have to experiment and practice.
> Needlenose pliers and tweezers also come in handy.
[Non-text portions of this message have been removed]
|
|
Back to top |
|
 |
Bill Chriss Centurion


Joined: 12 Apr 2006 Posts: 1000 Location: Texas
|
Posted: Thu Aug 19, 2004 3:47 am Post subject: Re: Bowstrings Question |
 |
|
> Hi Guy,
>
> Getting a little anal perhaps, but am inspired by some paint jobs I've
> seen
> and wanting to up appearance of next troops I paint. I overheard a
> discussion
> about stringing bows up several months back and am considering giving it
> a try
> in 15mm. I also liked the chariot reins I saw at DBM tournament in LA in
> June. Anyone out there do any of this? Do you do anything more than
> knot some
> fine thread and perhaps dot it with superglue to fix knot?
>
> Thanks,
> John Garlic
>
>
I am a bowstringer in 15mm. String will not work. It's too flimsy. Strip
some speaker wire and use the filaments, supergluing after you wrap each
end around each end of the bow. Some figures are amenable to drilling the
pullback hand behind the arrow feather to v-shape the string of a figure
in the act of shooting. You just have to experiment and practice.
Needlenose pliers and tweezers also come in handy.
Greek
_________________ -Greek |
|
Back to top |
|
 |
Bill Chriss Centurion


Joined: 12 Apr 2006 Posts: 1000 Location: Texas
|
Posted: Thu Aug 19, 2004 5:46 pm Post subject: Re: Bowstrings Question |
 |
|
> Greek,
>
> You do the string after paint job I assume?
>
> John
>
No. You do it before. Then black prime the entire figure with spray primer
and dry brush the string white or ivory.
Greek
_________________ -Greek |
|
Back to top |
|
 |
John Garlic Legionary


Joined: 12 Apr 2006 Posts: 450 Location: Weslaco, TX
|
Posted: Thu Aug 19, 2004 11:39 pm Post subject: Re: Bowstrings Question |
 |
|
Thanks Greek and Kelly for some ideas to digest on bowstrings as I begin work
on my new 15mm army. Can't say what it is since hoping to finish work by
FWW.
John
[Non-text portions of this message have been removed]
|
|
Back to top |
|
 |
Phil Gardocki Centurion

Joined: 12 Apr 2006 Posts: 893 Location: Pennsylvania
|
Posted: Thu Aug 19, 2004 11:56 pm Post subject: Re: Bowstrings Question |
 |
|
I have used dental floss (15) and tape (25mm). Remember you have to out
proportion the object or will not look right.
Phil
[Non-text portions of this message have been removed]
|
|
Back to top |
|
 |
Kelly Wilkinson Dictator

Joined: 12 Apr 2006 Posts: 4172 Location: Raytown, MO
|
Posted: Fri Aug 20, 2004 1:07 am Post subject: Re: Bowstrings Question |
 |
|
Johnny,
I use very flattened wire from the hardware store that I paint leather
color. It seems to be easier to work with than thread or string.
kelly
jmgarlic@... wrote:
Hi Guy,
Getting a little anal perhaps, but am inspired by some paint jobs I've seen
and wanting to up appearance of next troops I paint. I overheard a discussion
about stringing bows up several months back and am considering giving it a try
in 15mm. I also liked the chariot reins I saw at DBM tournament in LA in
June. Anyone out there do any of this? Do you do anything more than knot some
fine thread and perhaps dot it with superglue to fix knot?
Thanks,
John Garlic
[Non-text portions of this message have been removed]
Yahoo! Groups SponsorADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/WarriorRules/
To unsubscribe from this group, send an email to:
WarriorRules-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
[Non-text portions of this message have been removed]
_________________ Roll down and Win! |
|
Back to top |
|
 |
|