Warrior Ancient and Medieval Rules

Historian · Posted: Mon Nov 06, 2017 1:22 am Post subject: Circuit Board Standoffs

This is for Scott MacDonald. They are called Circuit Board Standoffs or Brass (steel, plastic) spacer standoff. An example from amazon is at https://www.amazon.com/uxcell-20pcs-Standoff-Spacer-Female/dp/B00NQA1W8K/ref=sr_1_3?s=industrial&ie=UTF8&qid=1509931294&sr=1-3&keywords=brass+spacer+Standoff+40mm

scott holder · Posted: Mon Nov 06, 2017 12:25 pm Post subject:

Here's two ebay links as well:

https://www.ebay.com/itm/20-Pcs-M3-Male-x-M3-Female-40mm-Screw-Thread-PCB-Stand-off-Spacers-DT/262461410250?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649

https://www.ebay.com/itm/M3-x-40mm-Female-Female-Thread-Brass-Hex-Standoff-PCB-Pillar-Spacer-10pcs/231621870713?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649

The second one is female-female so that you don't have to cut off any threaded ends. One pack of each and you should be good to go.

Historian · Posted: Tue Nov 07, 2017 9:14 pm Post subject:

Scott MacDonald, I took the liberty to order 50 more of these in 40mm. both MF and FF, so if you want to wait till Cold Wars I'll just give them to you.

Frank Gilson · Posted: Wed Nov 08, 2017 9:35 am Post subject:

What are these for? Wink

Historian

These are precisely milled circuit board spacers (Stand off's), to be used as a measurement device. They come in many sizes including 40mm, which is ideal for Warrior 25mm. They also come in 1", but be wary to not order 25mm, as you lose .4 mm per increment.

They are narrow, adjustable to suit, and I'll also leave 10 of them screwed together and use it as a pointer.