Warrior Ancient and Medieval Rules

scott holder · Posted: Mon May 05, 2003 4:48 pm Post subject: Aztec Figure Needed

Well, this is kinda an Aztec figure needed. Both Jon and I are lookin for a
quetzalcoatl figure, he in 15mm, me in 25mm for inclusion into expected FanWar
derivatives of our Aztec armies.

I know from my decades of playing D&D that such figures exist and one woulda
have thunk Rap Partha (Iron Wind) would make it in 25mm but a perusal of the
recent catalogue and noooooooooooooo quetzalcoatl.

I've done some looking on TMP but nothing's jumped out at me.

Also, does anybody make sheet metal bases for 30mm? I ask because I plan on
mounting my FanWar on 25mm bases (since they're 25mm figures) but said bases
will be magnatized. So, all I will need to do is stick them on the metal 30mm
sheet metal base and can play in both scales. This would help me and Jon since
he's planning on mounting stuff 30mm because of the figures he has and it might
help us demo the game later this year at a sci fi con. Should we manage some
demos, part of what I'd like to do is have at least one "historical" army with
it's mythological component involved so that we can promote the demo rules but
also whip a little historicalness onto a prospective gamer at the same time.

Thanks,

Scott

joncleaves · Moderator Joined: 29 Mar 2006 Posts: 16447

Ren Ink makes a range of bases 80mm wide and the appropriate depths.

[Non-text portions of this message have been removed]

Legionary Joined: 12 Apr 2006 Posts: 340

In a message dated 5/5/03 7:44:30 AM Pacific Daylight Time,
Scott.Holder@... writes:

<< Subj: [WarriorRules] Aztec Figure Needed
Date: 5/5/03 7:44:30 AM Pacific Daylight Time
From: Scott.Holder@... (Holder, Scott)
Reply-to: <A HREF="mailto:WarriorRules@yahoogroups.com">
WarriorRules@yahoogroups.com</A>
To: warriorrules@yahoogroups.com

Well, this is kinda an Aztec figure needed. Both Jon and I are lookin for a
quetzalcoatl figure, he in 15mm, me in 25mm for inclusion into expected
FanWar derivatives of our Aztec armies.

I know from my decades of playing D&D that such figures exist and one woulda
have thunk Rap Partha (Iron Wind) would make it in 25mm but a perusal of the
recent catalogue and noooooooooooooo quetzalcoatl.

I've done some looking on TMP but nothing's jumped out at me.

Also, does anybody make sheet metal bases for 30mm? I ask because I plan on
mounting my FanWar on 25mm bases (since they're 25mm figures) but said bases
will be magnatized. So, all I will need to do is stick them on the metal
30mm sheet metal base and can play in both scales. This would help me and
Jon since he's planning on mounting stuff 30mm because of the figures he has
and it might help us demo the game later this year at a sci fi con. Should
we manage some demos, part of what I'd like to do is have at least one
"historical" army with it's mythological component involved so that we can
promote the demo rules but also whip a little historicalness onto a
prospective gamer at the same time.

Thanks,

Scott
>>

Scott
In an old RP catalog, there was a quetzalcoatl. It is not in the 2000 Iron
Wind catalog. I was talking to the Iron Wind guys at CW. They said that
they will be coming out with a new catalog very soon, with "new old" RP
figures. Unless this figure was tied to a porprietary line like D&D or
Shadowrun, it might be in the new one. Email them and find out.

John the OFM

joncleaves · Moderator Joined: 29 Mar 2006 Posts: 16447

In a message dated 5/6/2003 07:10:02 Central Daylight Time,
Scott.Holder@... writes:

> >Great. I'd like a couple of these anyway. They're not terribly good at
> responding to emails. Yunno, Jon and I both *knew* that RP had made winged
> serpents at one point or another over the years which was why we'd
> repeatedly scoured the new catalogue making sure we didn't overlook
> something.
>

Scott - wanna handle researching Iron Wind? I'll take 25mm as well.

[Non-text portions of this message have been removed]

scott holder · Posted: Tue May 06, 2003 3:08 pm Post subject: RE: Aztec Figure Needed

In an old RP catalog, there was a quetzalcoatl. It is not in the 2000 Iron
Wind catalog. I was talking to the Iron Wind guys at CW. They said that
they will be coming out with a new catalog very soon, with "new old" RP
figures. Unless this figure was tied to a porprietary line like D&D or
Shadowrun, it might be in the new one. Email them and find out.

>Great. I'd like a couple of these anyway. They're not terribly good at
responding to emails. Yunno, Jon and I both *knew* that RP had made winged
serpents at one point or another over the years which was why we'd repeatedly
scoured the new catalogue making sure we didn't overlook something.

scott

scott holder · Posted: Tue May 06, 2003 3:12 pm Post subject: RE: Aztec Figure Needed

I'll handle Iron Wind. If I can find em, or request em, I'll letcha know about
a mini-group purchase.

-----Original Message-----
From: JonCleaves@...
Sent: Tuesday, May 06, 2003 6:05 AM
To: WarriorRules@yahoogroups.com
Subject: Re: [WarriorRules] Aztec Figure Needed

In a message dated 5/6/2003 07:10:02 Central Daylight Time,
Scott.Holder@... writes:

> >Great. I'd like a couple of these anyway. They're not terribly good at
> responding to emails. Yunno, Jon and I both *knew* that RP had made winged
> serpents at one point or another over the years which was why we'd
> repeatedly scoured the new catalogue making sure we didn't overlook
> something.
>

Scott - wanna handle researching Iron Wind? I'll take 25mm as well.

[Non-text portions of this message have been removed]

To unsubscribe from this group, send an email to:
WarriorRules-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Recruit Joined: 12 Apr 2006 Posts: 11

Scott wrote:

> I'll handle Iron Wind. If I can find em, or request em, I'll
letcha know about a mini-group purchase.

Hey, Scott and Jon. Nice place you've got here. Glad that on my
first post I can contribute something.

The figure you remember was from Ral Partha; you can see it here:

http://lego.zianet.com/dac/html/00074.htm

The codes shown above the JPEG will help you ID the figure to Iron
Wind, but that may not help. I believe it was a licensed Shadowrun
figure. Anyway, good luck with your hunt.

You can blame John Carroll for my signing up here.

Allen

Legionary Joined: 12 Apr 2006 Posts: 340

In a message dated 5/9/03 3:41:50 PM Pacific Daylight Time, aecurtis@...
writes:

<<
You can blame John Carroll for my signing up here.

Allen

>>

It's like the puppy that follows you home.

John the OFM

Mike Turner · Posted: Sat May 10, 2003 2:04 am Post subject: Re: Aztec Figure Needed

Thanks Allen!
Jon's Road Runner connection is down and he asked me to thank you for
the info.
Mike T.

--- In WarriorRules@yahoogroups.com, "Allen Curtis" <aecurtis@g...>
wrote:
> Scott wrote:
>
> > I'll handle Iron Wind. If I can find em, or request em, I'll
> letcha know about a mini-group purchase.
>
> Hey, Scott and Jon. Nice place you've got here. Glad that on my
> first post I can contribute something.
>
> The figure you remember was from Ral Partha; you can see it here:
>
> http://lego.zianet.com/dac/html/00074.htm
>
> The codes shown above the JPEG will help you ID the figure to Iron
> Wind, but that may not help. I believe it was a licensed Shadowrun
> figure. Anyway, good luck with your hunt.
>
> You can blame John Carroll for my signing up here.
>
> Allen

Recruit Joined: 12 Apr 2006 Posts: 11

Mike wrote:

> Thanks Allen!
> Jon's Road Runner connection is down and he asked me to thank you
for the info.

Hooah. Something else I noted while surfing around for that figure:
apparently the bulk of it was resin, so that may also not be in Iron
Wind's immediate production plans.

I'm still looking, though, because I remember *another* one out
there. It was obscure. I'll let you know if I find it.

Allen

Recruit Joined: 12 Apr 2006 Posts: 85

Give a try on Bartertown.com They let you put up
requests and you may even find one listed on the 4
sale parts. Mark

--- Allen Curtis <aecurtis@...> wrote:
> Scott wrote:
>
> > I'll handle Iron Wind. If I can find em, or
> request em, I'll
> letcha know about a mini-group purchase.
>
> Hey, Scott and Jon. Nice place you've got here.
> Glad that on my
> first post I can contribute something.
>
> The figure you remember was from Ral Partha; you can
> see it here:
>
> http://lego.zianet.com/dac/html/00074.htm
>
> The codes shown above the JPEG will help you ID the
> figure to Iron
> Wind, but that may not help. I believe it was a
> licensed Shadowrun
> figure. Anyway, good luck with your hunt.
>
> You can blame John Carroll for my signing up here.
>
> Allen
>
>

Recruit Joined: 12 Apr 2006 Posts: 244

--- In WarriorRules@yahoogroups.com, "Allen Curtis" <aecurtis@g...>
wrote:
> Scott wrote:
>
> > I'll handle Iron Wind. If I can find em, or request em, I'll
> letcha know about a mini-group purchase.
>
> Hey, Scott and Jon. Nice place you've got here. Glad that on my
> first post I can contribute something.
>
> The figure you remember was from Ral Partha; you can see it here:
>
> http://lego.zianet.com/dac/html/00074.htm
>
> The codes shown above the JPEG will help you ID the figure to Iron
> Wind, but that may not help. I believe it was a licensed Shadowrun
> figure. Anyway, good luck with your hunt.
>
> You can blame John Carroll for my signing up here.
>
> Allen

Try:
http://www.sentrybox.com/figures/figures-frame.html

Go to Ral Partha, scroll passt all that silly historical stuff to
25mm Sci-Fi. Number 10-861 goes for $44, but in Canadian dollars. I
bought some stuff from them before. They're OK.

John the OFM

Legionary Joined: 12 Apr 2006 Posts: 340

In a message dated 5/19/03 10:42:19 AM Pacific Daylight Time,
Scott.Holder@... writes:

<< Subj: RE: [WarriorRules] Re: Aztec Figure Needed
Date: 5/19/03 10:42:19 AM Pacific Daylight Time
From: Scott.Holder@... (Holder, Scott)
Reply-to: <A HREF="mailto:WarriorRules@yahoogroups.com">
WarriorRules@yahoogroups.com</A>
To: WarriorRules@yahoogroups.com

Thanks. Sheesh, that's one incredibly expensive figure. Must be all that
pewter:) >>

But you know you need it. I saw you rummaging through those Aztec drawers at
Cold Wars...

John the OFM

scott holder · Posted: Mon May 19, 2003 8:37 pm Post subject: RE: Re: Aztec Figure Needed

Thanks. Sheesh, that's one incredibly expensive figure. Must be all that
pewter:)

-----Original Message-----
From: johncarroll453@...
Sent: Monday, May 19, 2003 10:23 AM
To: WarriorRules@yahoogroups.com
Subject: [WarriorRules] Re: Aztec Figure Needed

--- In WarriorRules@yahoogroups.com, "Allen Curtis" <aecurtis@g...>
wrote:
> Scott wrote:
>
> > I'll handle Iron Wind. If I can find em, or request em, I'll
> letcha know about a mini-group purchase.
>
> Hey, Scott and Jon. Nice place you've got here. Glad that on my
> first post I can contribute something.
>
> The figure you remember was from Ral Partha; you can see it here:
>
> http://lego.zianet.com/dac/html/00074.htm
>
> The codes shown above the JPEG will help you ID the figure to Iron
> Wind, but that may not help. I believe it was a licensed Shadowrun
> figure. Anyway, good luck with your hunt.
>
> You can blame John Carroll for my signing up here.
>
> Allen

Try:
http://www.sentrybox.com/figures/figures-frame.html

Go to Ral Partha, scroll passt all that silly historical stuff to
25mm Sci-Fi. Number 10-861 goes for $44, but in Canadian dollars. I
bought some stuff from them before. They're OK.

John the OFM

To unsubscribe from this group, send an email to:
WarriorRules-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/